Domestic "US" Power Cords
International Power Cords
Speaker Cables


Generation II "SE"™ - Domestic Power Cords

GEN II Platinum Series "SE" (Special Edition) Low Out-put “Digimax" 3-18 10 Amp Digital Power Supply Cord with hand assembled Furutech 120V-20 Amp grounded male and 120V-15 Amp IEC 320-C13 female plugs

For use in the USA and all other countries with standard 110-120V AC electrical service

Digimax 3-18 Low Out-put (cable rated for 10 Amps) Digital Power Supply Cords with hand assembled Furutech 120V-20 Amp male and 120V-15 Amp IEC 320-C13 female plugs with 24 Kt. gold plated contacts and "Static Guard" Platinum Silver colored tightly woven Nylon multi-filament outer covering.

furatech 15 amp female plug  
120V-20 Amp Male Plug   120V-15 Amp IEC 320-C13 Female Plug

  Technical Specifications

  • GEN II "SE" (Special Edition) Digimax 3-18 Low Out-put digital supply cable rated for 10 Amps, featuring our newest construction and design technology for fast, accurate, filtered current flow to all low out-put digital components.

  • Conductors are 6-9's (99.9999%) pure finely stranded OFHCEBC (oxygen free high conductivity electrolytic bare copper) in a very finely stranded rope lay design resulting in a larger circular mil area for each conductor for enhanced conductivity, current flow and energy savings.

  • Conductors are insulated with a 105ºC RoHS (lead free) flame retardant thin wall low durometer PVC for enhanced flexibility and color coded in Black, White and Green (ground). Conductors are cabled in a precise overlay pattern to minimize contact points and are wrapped in an unsintered PTFE tape to prevent adhesion to the inner wall of the jacket and keep the cabled conductors in place.

  • Jacket is a 85ºC RoHS (lead free) flame retardant medium wall Black low durometer PVC, surface printed with our name, the cable name, it’s UL™ listing*, “Made in USA” and directional arrows to insure proper current flow for maximum performance from current source to individual components.

    * UL™ dual listed for “in wall” current carrying use between components and as an  approved power cable for low out-put power supply cords.
  • Finished, jacketed cable is then shielded with a special proprietary flame retardant, non-metallic "RFI/EMI" overbraid with 98% coverage, to further prevent outside interference, while maintaining cable flexibility and providing enhanced overall performance.
  • Outer covering over "RFI/EMI" shield is a premium grade “Static Guard” abrasion resistant tightly woven Platinum Silver colored Nylon multi-filament for eye pleasing aesthetics and maximum flexibility. 

  • Cable is rated for 10 Amp digital and other applications in 110-120V domestic AC circuits.

  • Specifically designed and recommended for use with high speed digital equipment applications including DACS, CD/DVD/SACD players, outboard phono pre-amps, high speed transformer devices and other low amperage applications that require a 20 Amp male plug and an IEC 320-C13 female plug.

  • Supplied in standard lengths of 3, 4, 5, 6, 8, 10, 12 and 15 feet. Custom cut “foot” and “metered” lengths are available on special order. Please contact our order department for pricing and lead time.  

  • Packaged in padded display cartons at one power supply cord per carton.  
                     CATALOG NUMBER     PACKING
  SS-GEN II-PCLOD-10-F20M15F-3 (3 feet)   1 Per Carton
  SS-GEN II-PCLOD-10-F20M15F-4 (4 feet)   1 Per Carton
  SS-GEN II-PCLOD-10-F20M15F-5 (5 feet)   1 Per Carton
  SS-GEN II-PCLOD-10-F20M15F-6 (6 feet)   1 Per Carton
  SS-GEN II-PCLOD-10-F20M15F-8 (8 feet)   1 Per Carton
  SS-GEN II-PCLOD-10-F20M15F-10 (10 feet)   1 Per Carton
  SS-GEN II-PCLOD-10-F20M15F-12 (12 feet)   1 Per Carton
  SS-GEN II-PCLOD-10-F20M15F-15 (15 feet)   1 Per Carton