Gen II Power Cords
Gen II SE Power Cords
Gen 1 Power Cords

An Overview of Our Domestic Power Supply Cables
and Power Cords

In high performance audio, the use of a dedicated circuit to supply the outlets in a room used exclusively for sound and/or video reproduction (stereo systems, home theater, surround sound, etc.) is recommended whenever and wherever possible. This serves to minimize possible Radio Frequency and Electro Magnetic interference caused by other types of electrical or electronic components being connected to that circuit. In effect, you are isolating your system's components from the potential for outside interference that could compromise the overall quality of sound reproduction in your sound system. A dedicated line will provide the best chance for the delivery of clean, filtered voltage to your sound system. Using electrically approved high performance power supply cables to deliver the electricity tthrough dedicated circuits is recommended over the standard household wiring normally supplied from panel boxes to wall outlets. Once you provide a dedicated line (circuit), you are ready to connect and power up your audio system, using our high performance power supply cords, as required, to maximize the overall performance of your system’s components.

Our GEN II Platinum Series™ and GEN II "SE" (Special Edition) Platinum Series™ high performance, high out-put power supply cables are UL™ & CSA™ approved for “in wall” and dedicated circuit applications. Both are rated for 30 Amps and made with 100% RoHS (lead free) PVC insulating compounds in compliance with all domestic and international standards for the conductors and outer jacket. They are also used to manufacture and supply our Gen II™ and GEN II “SE” (Special Edition) Platinum Series™ domestic high performance, high out-put power supply cords (cable rated for 30 Amps) and our GEN II Platinum Series Digimax-18™ Low out-put digital power supply cords (cable rated for 10 Amps).

Our original product line of Tricormaxial™ High Out-put Power Cable (cable rated for 30 Amps), Medium Out-put Power Cable (cable rated for 20 Amps) and Low Out-put Digital Power Cable (Cable rated for 10 Amps) is also available for use in dedicated circuits, but mainly as power supply cords. They all feature RoHS (lead free) PVC insulating compounds in compliance with all domestic and international standards for the conductors and outer jacket. Theiy are mainly used as power supply cords with molded-on plugs and are now also available with high performance hand assembled Furutech male and female plugs with 24 Kt. Gold plated contacts.

 

The proper application and use of high performance power cables and power supply cords will greatly enhance overall component performance and quality of sound reproduction in all sound systems. This is not just our opinion. It is the opinion of sound and electrical engineers, our competitors and the audiophile reviewers that test and evaluate high-end audio components and cables. As the prime manufacturer of our cables, we have tight controls on their designs and constructions, production costs, quality control, productivity, performance, testing, packaging, sales and shipping. There is no cable outsourcing, as with most of our competitors. The result is that we consistently manufacture and supply high performance, high quality power supply cables and power supply cords at very reasonable and affordable prices - an unbeatable winning combination! Detailed information for our power supply cables and power supply cords can be found in the drop down boxes associated with each product in the appropriate areas of our web site.                                                                        ___________________________________________________________________________

Soundstring Power Supply Cords are an extension of our power supply cables. They carry the line voltage from the wall outlets in a sound room to each component in your sound system, or to a Voltage Regulator or Power Strip and then to the individual components. A brief description of the three styles of power supply cords we manufacture is shown below. Detailed information for each can be found in the drop down boxes for each type under the appropriate headings shown on our home page. Shown below is a brief overview.

 

Gen II Platinum Series Power Supply Cords

 

The GEN II Platinum Series™ Delta 3-12 is a high out-put power cord that is rated for 30 Amps. The Gen II Digimax 3-18™ is a Low Out-put “Digital” power cord that is rated for 10 Amps. Both cables are UL™ & CSA™ approved and suitable for use in all 120 volt AC domestic electrical service. They are made with hand assembled high performance Furutech male and female plugs with 24 Kt. Gold plated contacts. These power cords are available in a wide range of standard and custom cut lengths with 120V 15 or 20 Amp grounded male plugs and with 120V female IEC 320-C13 (15 Amp) or IEC 320-C19 (20 Amp) grounded female plugs, depending upon the individual component requirements. All Gen II™ domestic power supply cords with Furutech plugs are made and supplied with our Platinum Silver “Static Guard”™ woven Nylon outer covering.All GEN II™ power cords have shrink tubing at both ends with our name and directional arrows to insure proper installation of the plugs for maximum performance.

 

Gen II "SE" (Special Edition) Platinum Series

The GEN II SE Platinum Series™ Delta 4-12 is a High out-put power cord that is also rated for 30 Amps. The Gen II SE Digimax 3-18™ is a Low Out-put “Digital” power cable that is rated for 10 Amps. All of the standard GEN II power cord product line raw materials, cable performance and attributes are present and enhanced in the “SE” cables. They represent upgrades to all of the GEN II cables providing higher levels of performance at a modest increase in cost. All are UL™ & CSA™ approved and suitable for use in all 120 volt AC domestic electrical service.

The GEN II Platinum Series “SE”™ (Special Edition) power cords feature our special proprietary “RFI/EMI” non-metallic 98% braid shield for added protection against outside interference and a double neutral conductor for improved voltage flow. The high out-put power cords are UL™ and CSA™ approved. They are made with hand assembled Furutech high performance male and female plugs with 24 Kt. Gold plated contacts for maximum conductivity. Power cords with Furutech plugs are available in a wide range of standard and custom cut lengths (in feet or meters) with 120V male plugs designed and rated for 15 Amp or 20 Amp service and with 120V female IEC 320-C13 (15 Amp) or IEC 320-C19 (20 Amp) female plugs, depending upon the application and individual component requirements. All “SE” domestic power supply cords with Furutech plugs are made and supplied with our Platinum Silver “Static Guard” woven Nylon outer covering and all have shrink tubing at both ends with our name and directional arrows to insure proper installation of the plugs and maximum performance.                                                                

Gen I (Our Original Power Cords)

Our original series of Tricormaxial™ High Performance, High Out-put Power Cords (cable rated for 30 Amps), Medium Out-put Power Supply Cords (cable rated for 20 Amps) and Low Out-put Digital Power Supply Cords (cable rated for 10 Amps) are high performance, lower cost options to the newer GEN II™ and GEN II SE™ power supply cords. They each feature our patented "multi-conductor/multi-gauged" design where voltage flow seeks the path of least resistance over the multi-conductor design to promote enhanced component performance. They are available in a limited supply with the original molded-on 120V-15 Amp male and IEC 320-C13 female plugs in 3 ft., 6 ft. and 8 ft. lengths only. They are also available with our hand assembled Furutech high performance male and female plugs with 24 Kt. Gold plated contacts for maximum conductivity. All of the original power cords with Furutech plugs are available in a wide range of standard and custom cut lengths (in feet and meters) with 120V male plugs designed and rated for 15 Amp or 20 Amp service and with 120V female IEC 320-C13 (15 Amp) or IEC 320-C19 (20 Amp) female plugs, depending upon the application and individual component requirements. All of our original domestic power supply cords with Furutech plugs are made and supplied with our Harvest Gold "Static Guard" woven Nylon outer covering and all have shrink tubing at both ends with our name and directional arrows to insure proper installation of the plugs and maximum performance.